vanburn Posted April 6, 2023 Report Posted April 6, 2023 Does any one a good copy of Star Disc SD024 or especially Too Much Fun the graphics on mine are bad
Snr. Administrator BJtheDJ Posted April 6, 2023 Snr. Administrator Report Posted April 6, 2023 One of the regulars here PM'd me with a question, and it may be that others here might like to use the answer Hi BJ quick upload question When you get to the glo part how do you copy and paste or say place a track listing in the description Not sure what you're asking. but here goes: The way that I list the content of a torrent is to: 1. Go to the directory and copy the Path in the top line, say it's on drive F: and a directory called YOUR DIRECTORY then select F:\YOUR DIRECTORY 2. Open a DOS box by right-clicking on Start and selecting Command Prompt. 3. Select the drive where you files are, say if they're in F Drive the type " F: " and the the Enter key - the Command Prompt on the left shoudld now read F:\> 4. Type CD and then a space and then press Ctrl+V to paste the Path that you copied in 1. above, into the DOS box and then press Enter again; the Command Prompt will now look like F:\YOUR DIRECTORY 5. If you want to list the entire directory then type DIR to find out the options for that command type DIR/? and you'll get a full list of the command options. 6. To get a bare listing of the file names then type DIR/b 7. To only list files of one type then specify the type by using the wildcard symbol * and the filetype that you want. Say all ZIP fgiles then the command is dir/b *.zip or for text files it would be dir/b *.txt 8. To get the directory listing into a usable state then you need to change the output of the DIR command from the screen to a text file. Do the by using the > symbol which directs the output to the input of another program. 9. So the command dir/b *.zip>zipfiles.txt will list the zip files in the directory in a bare format and input them into a text file named zipfiles.txt 10. BTW in DOS (Command mode) there's no difference between upper and lower case letters which is why it changes change in the descriptions above. 11. Open the text file by double-clicking on it in Explorer or typing the name of the file in Command Mode it will then open in Notepad. 12. Once the file is open in Notepad then you can tidy it up by editing the content - if you need to remove the .ZIP extensions then do the following in Notepad; a: type Ctrl+H which will open the Replace box b: then type .zip into the Find What: box c: then press Alt+A to remove all of the zip extensions and leave you with a plain list of the filenames, d: then save the file by pressing Ctrl+S
Premium VIP Sharkie Posted April 6, 2023 Premium VIP Report Posted April 6, 2023 Does any one a good copy of Star Disc SD024 or especially Too Much Fun the graphics on mine are bad Hi Vanburn Try this copy I have not checked these out yet but hopefully they are better Star Disc 024 This is the hidden content, please Sign In or Sign Up
vanburn Posted April 6, 2023 Report Posted April 6, 2023 Hi Vanburn Try this copy I have not checked these out yet but hopefully they are better Star Disc 024 This is the hidden content, please Sign In or Sign Up Thanks Sharkie better then mine this also gets glitchey towards the end but totally playable thanks.
Snr. Administrator BJtheDJ Posted April 6, 2023 Snr. Administrator Report Posted April 6, 2023 Can see that people are missing some EZPs: EZP012, EZP018, EZP072, EZP089, EZP090, EZP091, EZP092, EZP108, EZP119, EZP126, EZP128, EZP130, EZP131, EZP132, EZP133 onward. Am busy getting what I can together. Have these almost ready to go: 72 - no covers First in the list. This is the hidden content, please Sign In or Sign Up Content: EZP072-01 - Shayne Ward - That's My Goal EZP072-02 - Girls Aloud - See the Day EZP072-03 - Westlife & Diana Ross - When You Tell Me That You Love Me EZP072-04 - Robbie Williams - Advertising Space EZP072-05 - Nizlopi - The JCB Song EZP072-06 - Sugababes - Ugly EZP072-07 - Oasis - Let There Be Love EZP072-08 - Franz Ferdinand - Walk Away EZP072-09 - Kelly Clarkson - Because of You EZP072-10 - KT Tunstall - Under the Weather EZP072-11 - Chris Brown - Run It EZP072-12 - Beyonce - Check On It 4
Snr. Administrator BJtheDJ Posted April 6, 2023 Snr. Administrator Report Posted April 6, 2023 (edited) Anybody know of a program that can correct keystone in images?? Have some pics that need to have their verticals corrected. Yep, PhotoShop will do it but I'm not conversant. Edited April 7, 2023 by BJtheDJ
sacot1 Posted April 7, 2023 Report Posted April 7, 2023 Thanks Sharkie better then mine this also gets glitchey towards the end but totally playable thanks. This is probably the same as Sharkies but i listened and watched it, there is some small minor glitches right at the end in the on screen lyrics but can still be read easily and the music has no glitches at all. This is the hidden content, please Sign In or Sign Up
Snr. Administrator BJtheDJ Posted April 7, 2023 Snr. Administrator Report Posted April 7, 2023 Does any one a good copy of Star Disc SD024 or especially Too Much Fun the graphics on mine are bad Checked the Daryl Singletary track and it's OK to the end, complete disc here. This is the hidden content, please Sign In or Sign Up SD024-01 - Shania Twain - You Win My Love SD024-02 - Blackhawk - Almost a Memory Now SD024-03 - Wynonna - To Be Loved By You SD024-04 - Diamond Rio - Walkin' Away SD024-05 - Faith Hill - Someone Else's Dream SD024-06 - Alabama - It Works SD024-07 - John Berry - Every Time My Heart Calls Your Name SD024-08 - Lonestar - No News SD024-09 - Terri Clark - If I Were You SD024-10 - Daryl Singletary - Too Much Fun SD024-11 - Ricochet - What Do I Know SD024-12 - Keith Stegall - 1969 SD024-13 - Billy Dean - It's What I Do SD024-14 - Neal McCoy - You Gotta Love That 1
Snr. Administrator BJtheDJ Posted April 7, 2023 Snr. Administrator Report Posted April 7, 2023 Anybody know of a program that can correct keystone in images?? Have some pics that need to have their verticals corrected. Yep, PhotoShop will do it but I'm not conversant. Replying to myself here. Found a prog called Capture One which does the job but now I'm completely at a loss. Dragged a JPEG into the proggy and adjusted the image beautifully, but can't figure out how to save the image and start with a new one. The normal things like Ctrl+F4 to close a window don't work and if I close the program the same old image is right back there. All I want to do is open a JPEG, adjustthe keystone on it and then save the image. But I AM DAMNED if I can figure it out. Anubodyhere know the program ?? cheers BJ
wilkinp4 Posted April 7, 2023 Report Posted April 7, 2023 Replying to myself here. Found a prog called Capture One which does the job but now I'm completely at a loss. Dragged a JPEG into the proggy and adjusted the image beautifully, but can't figure out how to save the image and start with a new one. The normal things like Ctrl+F4 to close a window don't work and if I close the program the same old image is right back there. All I want to do is open a JPEG, adjustthe keystone on it and then save the image. But I AM DAMNED if I can figure it out. Anubodyhere know the program ?? cheers BJ Not looked, and don't know the software personally, but is there an EXPORT button anywhere BJ?
Snr. Administrator BJtheDJ Posted April 7, 2023 Snr. Administrator Report Posted April 7, 2023 Not looked, and don't know the software personally, but is there an EXPORT button anywhere BJ? Not sure, but I think that you may have found my solution my friend. 7.30am here so my bed has been beckoning for hours, but I shall try that tomorrow. cheers BJ
wilkinp4 Posted April 7, 2023 Report Posted April 7, 2023 (edited) One of the regulars here PM'd me with a question, and it may be that others here might like to use the answer Not sure what you're asking. but here goes: The way that I list the content of a torrent is to: 1. Go to the directory and copy the Path in the top line, say it's on drive F: and a directory called YOUR DIRECTORY then select F:\YOUR DIRECTORY 2. Open a DOS box by right-clicking on Start and selecting Command Prompt. 3. Select the drive where you files are, say if they're in F Drive the type " F: " and the the Enter key - the Command Prompt on the left shoudld now read F:\> 4. Type CD and then a space and then press Ctrl+V to paste the Path that you copied in 1. above, into the DOS box and then press Enter again; the Command Prompt will now look like F:\YOUR DIRECTORY 5. If you want to list the entire directory then type DIR to find out the options for that command type DIR/? and you'll get a full list of the command options. 6. To get a bare listing of the file names then type DIR/b 7. To only list files of one type then specify the type by using the wildcard symbol * and the filetype that you want. Say all ZIP fgiles then the command is dir/b *.zip or for text files it would be dir/b *.txt 8. To get the directory listing into a usable state then you need to change the output of the DIR command from the screen to a text file. Do the by using the > symbol which directs the output to the input of another program. 9. So the command dir/b *.zip>zipfiles.txt will list the zip files in the directory in a bare format and input them into a text file named zipfiles.txt 10. BTW in DOS (Command mode) there's no difference between upper and lower case letters which is why it changes change in the descriptions above. 11. Open the text file by double-clicking on it in Explorer or typing the name of the file in Command Mode it will then open in Notepad. 12. Once the file is open in Notepad then you can tidy it up by editing the content - if you need to remove the .ZIP extensions then do the following in Notepad; a: type Ctrl+H which will open the Replace box b: then type .zip into the Find What: box c: then press Alt+A to remove all of the zip extensions and leave you with a plain list of the filenames, d: then save the file by pressing Ctrl+S Or you can D/L software if you don't want to use DOS (No offence BJ). This is the hidden content, please Sign In or Sign Up is One such, you can add it to your right click context menu, so done in 2 clicks! but there are plenty of them on the market. This is the hidden content, please Sign In or Sign Up . In BJ's Scenario he would use "Karens" as it can also write the SHA Hash tag for torrenting. Edited April 7, 2023 by wilkinp4
wilkinp4 Posted April 7, 2023 Report Posted April 7, 2023 Happy Easter around the World to all the Christians. Time to get the religious karaoke out! Pop down to the local Church and get a gig. You wouldn't get paid for it, for what great PR to a potentially new audience! Has anybody ever done that?
DJChad Posted April 7, 2023 Report Posted April 7, 2023 That would be no. But you are welcome to try it and let us know how it went 1
Snr. Administrator BJtheDJ Posted April 7, 2023 Snr. Administrator Report Posted April 7, 2023 Or you can D/L software if you don't want to use DOS (No offence BJ). This is the hidden content, please Sign In or Sign Up is One such, you can add it to your right click context menu, so done in 2 clicks! but there are plenty of them on the market. This is the hidden content, please Sign In or Sign Up . In BJ's Scenario he would use "Karens" as it can also write the SHA Hash tag for torrenting. Thing is, I like DOS and I know how to get things done with it. Used it long before Windows, loved DR-DOS which was so much better than MS-DOS. I went to the URL for Karen's and got to a list of programs, selected the link to Karen's This is the hidden content, please Sign In or Sign Up which had a link to Download Karen's Directory Printer which linked to This is the hidden content, please Sign In or Sign Up which linked to a PHP file - DOWNLOAD.PHP. Hmmm, searched for the program on the interweb and finally found somewhere to download it, found a LINK at UPTODOWON.COM AND FINALLY MANAGED TO GET THE INSTALL FILE. Installed the program and searched from the Start button, nope - not there. Then I looked and found that there was no link on the desktop either; no problem - it must a right-click option, but nope not there either. In the end I went to the install directory and started the program from there, but in the options there's no way of putting on right-click - which to me would be the obvious place to put it. I'll check out some of those other progs tomorrow. BTW, do you know of any mass directory renamer apart from ExplorerXP ??
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now